Factory Sealant picks up where your new car paint left off, delivering a durable Factory Protective Coating that leaves a Silky smooth shine and durable paint protection that lasts for months.
Why do leading auto manufacturers use Chemical Guys Mfg.Co. paint sealants to protects the finish of premium autos?
FS pure acrylic crystalline sealant contains no cleansers, waxes, silicones or polishing agents. FS creates a deep silky wet gloss look and feel while delivering a superior weather resistant protective coating. FS is a complete nano-tech. formulation utilizing particles no larger than 1/75,000th the size of a human hair, FS is a cleaner, thinner, stronger, lighter, and more precise formulation of raw chemicals, allowing for faster drying times, better bonding reactions with paints and surfaces and overall unparallel shine and protection. For optimal results, the paint surface must be in good condition or cleaned prior to application. Engineered to bond with surfaces not air, FS is formulated to react on contact, delivering a near-instant cure time, reducing surface distortion and improved its bonding ability to the paint surface as well as additional layers of product.
FS CAN BE APPLIED IN A CIRCULAR PATTERN OR SIDE TO SIDE, AND COMES OF LIKE MAGIC. THE EASE OF USE AND SPEED OF APPLICATION IS UNMATCHED.
FS acrylic crystaline base allows nano-particles to bond to each other when layering the product improving paints depth, appearance and shine while increasing durability. FS seals leaving behind a brilliant reflective impenetrable surface coating that aids in shielding against external contaminants: UV rays, salt, air, snow, sleet, insects, road film, harsh detergents and environmental contaminants that can fade or discolor automotive finishes prematurely.
Looking to try FS-Sealant, but don't need a gallon? We understand 1 gallon does go a long way, so maybe the 16oz size is more suitable for you so here it is!
(CLICK HERE) or on bottle.
rate scale:
Slickness: Low IIIIIIIIIIIIIIIIIIIIIIIIIIIIII High
Shine: Low IIIIIIIIIIIIIIIIIIIIIIIIIIIIII High
Protection: Low IIIIIIIIIIIIIIIIIIIIIIIIIIIIII High
Durability: Low IIIIIIIIIIIIIIIIIIIIIIIIIIIIII High
APPLICATION INSTRUCTIONS
- M-Seal Micro Finish Sealant is very durable, lasting up to six months.
- To maintain premium protection and a show car shine, we recommended using CG Synthetic Detailer Between applications or regularly as a maintenance spray.
- Lets get started! Thoroughly wash your auto.
- For best results, it is recommended to use a premium wash, Bodywash+Wax. and soft Microfiber Wash Mitt or Microfiber Sponge.
- Once surface is clean and dry, test surface and be sure that it's clean. If needed always clay surfaces with Clay Bar. and prepare with premium surface prep polish Pro-Polish.
- Apply a thin coat of M-Seal to your entire autos paint surface using a Microfiber applicator or Microfiber towel.
- On top panels, use front-to-back motions. On side panels, use up-and-down motions.
- To reduce friction and improve results reflectivity. Heavy rubbing is not necessary.
- Use a clean, Microfiber towel to buff and reveal beauty shine and depth of your paint.
- Unlike most paint protection sealants-Seal can be layered for improved results.
- The key to this product like all other Chemical Guys Products is understand these are professional products, and that a little goes a very long way.
- Always apply waxes and sealants in light even and thin layers.
