High intensity shine and zero marring on all paints!
Optimum Finish is a finishing polish like no other. Formulated for OEM use, Optimum Finish Polish leaves all paints with the ultimate gloss, reflection, and shine – even soft paints and black paint. Optimum Finish Polish is more than a finishing polish – it’s paint perfection in a bottle.
With so many types of clear coat on the market today, Optimum wanted a final finish polish that would work on the softest, most sensitive clears, but also be able to do some corrective work and have some range on a harder type of clear coat. You may ask why you need a final finish polish when the Optimum II polish can take care of almost ALL vehicles and still finish perfectly. Where these 2 products differ is that Optimum Final Finish will take care of any minute hazing, marring, or minor swirls that can just drive you crazy on certain blacks and softer, sensitive clear coats.
Optimum Final Finish will make the paint "POP" and the slickness is second to none. This is NOT a glaze or filler. The sub-micron abrasives will correct, but not "over-correct", leaving the paint absolutely perfect. You can buff extensively and the polish will keep cutting if you need a little more correction. When you are ready for that perfect final finish, the polish will back down and give you the ultimate gloss, reflection and shine. The polishing agents are encapsulated in proprietary polymers that protect the paint from dry buffing and prevent dusting. Simply put, Optimum Finish gives you the perfect finish every time.
You may not need this polish on every single vehicle as the final step, but once you see the final result, you will be addicted to Optimum Final Finish. Your customers will be amazed at the final result.
As with all Optimum polishes, this incredibly smooth, long working, zero dust formula is body shop safe, VOC compliant, and will work with any buffer, any buffing pad, and on any paint surface. It's virtually impossible to make a mistake with this product. The Optimum Final Finish will turn you into an all-star detailer, and every vehicle into a show car! Optimum Final Finish buffs wet and finishes off even wetter. Optimum Final Finish lays the foundation for a perfect, glossy finish once wax is applied.
To apply Optimum Final Finish, use light to medium buffing pressure with a finishing foam pad. For high speed buffers, 1000-1400 RPM will provide excellent swirl removal and a flawless finish. The polish is aggressive enough to remove 2500 sand scratches, but fine enough to produce perfect results even with a high speed buffer. For orbital buffers, use a medium to light cutting pad with moderate speed and pressure for desired results. Always use enough polish to create a barrier between the buffing pad and the paint surface. Wipe off residue by misting either water or Optimum Car Wax and gently wiping off with a Cobra Microfiber Towel.
Optimum Final Finish polish will create that special, flawless appearance. Don't forget, this product will correct those minor imperfections, not hide or fill them. The look that you obtain from this polish is a true, corrected, super wet look. Once you try it, you’ll want to finish every vehicle Optimum Final Finish.