Repair deep scratches and chips yourself, saving you a lot of money at the body shop. The Langka Complete Paint Chip Repair Kit gives you all the products you need (minus the paint) to make chips and scratches disappear!
Chips and scratches make your paint look neglected and old, yet they are unavoidable. Whether its keys, rocks, sticks, or sand, something is going to chip your paint sometime. With the Langka Complete Paint Chip Repair Kit, you can instantly improve the appearance and value of your vehicle!
The kit includes: a 2 oz. bottle of Langka Prepaint, a 2 oz. bottle of The Blob Eliminator, a Plastic Card, Langka Paint Sealant, and a Fine Tip Brush.
STEP 1: Langka Prepaint is a cleaner that prepares the chip for the paint. It contains bonding agents to ensure that the touch-up paint forms a permanent bond to the existing paint. Apply Prepaint to a cotton ball or cloth and wipe out the scratch or chip thoroughly.
STEP 2: Use the Fine Tip Brush to apply touch-up paint. You can buy touch-up paint from any auto parts store or your dealership. Fill in the scratch or chip completely, taking care to keep the paint within the blemish. Allow it to dry for several hours up to 4 days, depending on how much paint you applied and the climate. When it is no longer tacky to the touch, it’s dry.
STEP 3: After the paint has dried, you need to remove the blob of paint that stands above the paint surface. To do this, wrap the Plastic Card in a soft cloth. Use an old T-shirt for the best results. Anything with a nap or that sheds lint will compromise the smoothness of the paint. Cover the card with the cloth and pull it taut across the card. Twist the excess cloth in your hand so that the cloth is pulled flat and smooth over the card.
The Blob Eliminator is the real highlight of the kit. This product is designed to remove the raised blob of paint that typically occurs when paint is applied to a chip. Once you’ve covered the card in cloth, apply The Blob Eliminator generously to the flat surface of the card. Rub the card back and forth over the blob for 15-30 seconds until the blob is gone. When you begin to see paint on the card, apply less pressure until the blob completely disappears.
After you’ve removed the excess paint, apply Langka Paint Sealant to seal and protect the newly-painted area.
Your paint should look as good as new! If the paint pulls out as you are using The Blob Eliminator, the paint may not have dried completely. Try again, but this time, use the plastic card to squeegee over the top of the scratch or chip. Allow it to dry. The paint may shrink. If so, apply more paint and remove the excess with the card. Then use The Blob Eliminator as directed.
The Langka Complete Paint Chip Repair Kit is intended for vehicles made in 1990 or later. Do not use it on models before 1965 with their original paint. For models from 1965-1989, test an inconspicuous area first.
If you would like a visual demonstration of these steps, you can purchase the Langka Paint Chip Repair Process 5 Minute Training CD. It shows you step by step how to permanently correct chips and scratches to increase the beauty and value of your vehicle.
If your vehicle is suffering from unsightly chips and deep scratches, don’t call a professional. Fix it yourself with the Langka Complete Paint Chip Repair Kit!