Product ID: 3350
Decon Pro Iron Remover
Summary:
- Reacts with iron deposits to neutralize bond with porous surfaces
- Formula neutralizes the reactions that cause rust and paint failure caused by hot brake dust particles
- Iron catalyst turns purple once reaction is complete
- pH-balanced formula safe for all wheel types, gloss paint, clear coat finishes, polished metal, chrome, and glass
- Add to wheel-cleaning arsenal to remove toughest stuck on brake dust and contaminants
- Finish the car wash process with Decon Pro, then follow up with clay bar service for thorough decontamination during a full detail
About
Decon Pro removes stubborn brake dust, iron deposits, and other embedded metallic contamination from wheels and lower body panels. Brake dust contains shards of iron and steel from brake rotors, brake pad friction material, and burnt carbon left over after intense braking. This material gets sprayed out from the brakes and embeds itself into wheels, lower body panels, undercarriage parts, and all over nearby vehicles. This brake dust is corrosive and abrasive, and without proper and quick removal, it causes a chemical reaction that leads to permanent rust damage, or scratches and swirl marks from improper cleaning.
Decon Pro is a speciality gel that releases iron deposits and other ferrous metal contamination from automotive surfaces, then neutralizes the corrosive chemical reaction that leads to rust and paint failure. Speciality iron catalysts react with ferrous metals and turn purple once the chemical reaction releases embedded contamination from painted surfaces. Decon Pro is the only pH-balanced cleaner that removes deep contamination you can’t even see.
Take Iron Out of the Equation
Modern vehicles easily achieve higher speeds and require stronger braking systems to stop in time. These powerful brakes spit out large amounts of hot, corrosive, and filthy brake dust all over wheels and brake parts, and all over the rest of the vehicle. The hot iron particles embed into the surface, and cannot be fully removed by normal car washing techniques or products. Clay bars pull up the embedded debris, but do nothing to neutralize the corrosion reaction started by the decaying iron particles. DeCon Pro helps release the stuck-on iron deposits from the surface, and neutralizes the chemical reaction that begins to destroy paintwork, clear coat finishes, polished metals, and wheel finishes.
Directions:
- Start a full detail with a normal wash with two bucket method, Chemical Guys car wash shampoo, and premium soft car wash mitt
- Rinse away dirt and soap residue
- Spray down painted panels, wheel parts, glass, and windows with DeCon Pro
- Let DeCon Pro dwell for a few minutes; a chemical reaction will turn the clear solution purple once the iron particles have been released
- Never let DeCon Pro dry completely on the surface
- Rinse away the DeCon Pro residue with a sharp stream of water
- Continue the full detailing service with clay bar decontamination service, polishing (if desired), then seal the vehicle with desired coatings, glazes, sealants, or waxes
Wheel Cleaning:
- Rinse wheels with flowing water to remove loose dirt and grime particles
- Mist DeCon Pro over wheel surfaces and brake components like calipers and rotors
- Let DeCon Pro dwell for a few minutes; a chemical reaction will turn the clear solution purple once the iron particles have been released
- Never let DeCon Pro dry completely on the surface
- Rinse away the DeCon Pro residue with a sharp stream of water
- Continue cleaning wheels with greater ease and reduced scrubbing and agitation with wheel cleaning brushes, soaps, and cleaners
SPI21516