Product ID: 5036
Carpro Flyby Forte Windshield Coating Kit
- 1 Forte (15ml)
- 1 Ceriglass Glass Polish (50ml)
- 1 Eraser (50ml)
- 5 Cotton Applicators
- 1 Rayon Hand Polishing Pad
- 1 Suede Microfiber Towel
- Durability: Up to 2 years
- Initial contact Angle (DIN EN 828) : 115 Degrees
- Water drop sliding angle: <20 deg.
- Extreme abrasion resistance
- No wiper chatter
- Repels water, dirt, dust, salt, ice, and snow
- Easy to apply
- Long lasting durable protection
- Harsh chemicals resistant (from 4~12 pH)
- Improves night vision
FlyBy Forte is an entirely new technologically advanced windshield coating designed for extreme resistance to all that mother nature may throw at it. Development of Flyby Forte was heavily based on the latest and most advanced mobile phone anti-scratch protection. Our inorganic Nano-tech coating was specifically designed for extreme semi-permanent durability and long-term resistance to abrasion and chemicals.
Forte has been tested to over 40,000 real time wiper cleaning cycles, is UV stable, highly chemical resistant, and provides resistance to scratches and minor chips. Forte is the ultimate in windshield and glass coatings. Unlike traditional glass coatings, which attach to the surface, Forte fully bonds by penetrating the top surface of glass, merging and transforming it into a hydrophobic smooth surface. Flyby Forte does not allow chattering, wiper noise, or degradation of the glass. Expected durability is up to 2 years.
- Wear gloves
- Avoid applying over rubber trim or to the paint.
- If product contacts paint or rubber, wipe off with wet microfiber towel immediately
- Polish the glass
- Clean surface free of polishing oil residue with CarPro Eraser
- Pour a few drops over the supplied cotton pad
- Apply in circular motion in an organized pattern across the glass and do not wipe off. It will flash nearly invisible as you apply.
- On windshield: Repeat steps 3 and 4 (2 more times - 3 coats total) / On side windows skip this and move to next step
- Using the same applicator (but no additional Forte) once again repeat step 4 buffing off any trace of residue until the surface is 100% transparent and clear.
- After entire windshield is coated, apply Flyby Forte to the Wiper blades and leave wipers off of the glass for at least 10 minutes.
- For side windows only 1 layer is needed.
- Keep surface dry for 4 hours with no wiper blades for 24 hours.