Product ID: 4022128
Iron Maiden Fallout Remover
Iron Maiden is a powerful cleaner used to remove iron particles from all exterior surfaces of your vehicle, primarily used for paint, wheels, glass and chrome. Iron Maiden is an acid free cleaner that decontaminates the paint of your vehicle as well as your wheels and other metal surfaces that have been affected by iron oxidation (also known as Rust). Iron oxidation is an electrochemical process involving metal, water and oxygen working together to sweep away the paint particles that keep your vehicle shinning. Stop this process from damaging your investment with Iron Maiden.
Iron Maiden doesn’t just remove rust and oxidation, it prevents it. The rusting process is generally a slow process but it’s also an extremely damaging one. Chemicals found in rain, seawater and road salt speed up the rusting process. Iron Maiden will stop and prevent further damage to your paint while removing the iron particles already formed from any paint surface, leaving everything ready for polishing and further detailing.
Over time, brake dust builds up on your wheels as well as other contaminants picked up from the roadway. Your vehicles wheels are exposed to damaging particles and contaminates at a far greater rate than any other part of the vehicle. Iron Maiden is a top of the line wheel cleaner, removing damaging salts, tar and other iron particle containments that wheels are exposed to daily. One of the first thing people notice on a showroom car is the shine of the rims, keeps your rims shinning with Iron Maiden.
Directions: (Best results when working away from direct sunlight)
- Acid Free
- Safe for clear coats
- Does not deteriorate surface
- Safe to use on Aluminum, Chrome, Anodized, Alloy wheels
- Colour change shows the visual chemical process, so you know it’s working
- Wash vehicle
- Working on one panel at a time, Spray Riccardo Iron Maiden to panel.
- Iron particles will start to turn purple, After 2-3 minutes spray a foam applicator with Iron Maiden and agitate the panel. This step is optional but will greatly increase the effectiveness and speed of the process. You can repeat this step several times if necessary on severely contaminated panels.
- Once there is no visual iron particles on panel simply rinse panel with water.
- Once entire vehicle is complete it is recommended to wash entire vehicle and apply your favorite wax or sealant.