Product ID: 3083
Universal Pad Washer
The Grit Guard Universal Pad Washer is the first and only pad washer that cleans and dries all types of buffing pads on virtually any machine in seconds. The Universal Pad Washer Cleans foam pads, wool pads, hex-logic pads, convoluted foam pads, and buffing bonnets. The Universal Pad Washer works with virtually any machine, Flex, DeWalt, Porter-Cable, Black and Decker, Hitachi, and many more. Cleaning pads with a DA has never been easier. The Universal Pad Washer accommodates any dual action polisher as well.
No electricity required. Using a pad washer saves time and money, not to mention electricity. Washing machines can destroy and deteriorate foam and wools pads. The Grit Guard Universal Pad Washer needs only the power already produced by your polisher. The rotation of the polisher agitates and cleans the pad in seconds Let the polisher do the heavy cleaning for you. Insert the pad into the universal pad washer, turn on your polisher, and let the grid insert clean and dry all your buffing pads. The Universal Pad Washer works with virtually any machine, Flex, DeWalt, Porter-Cable, Black and Decker, Hitachi, and many more. Cleaning pads with a DA has never been easier. The Universal Pad Washer accommodates any dual action polisher as well.
Pad Washer Cleaning Tips: Keep the pad’s hook-n-loop or Velcro® brand backing out of the water when using the Grit Guard Universal Pad Washer. When using a dual action polisher, make a mark on the backing plate with a permanent marker. This mark will indicate to you when the pad has made a full rotation. If it is not rotating, lighten up your pressure. Fill with the appropriate level of water. Press down on the grid insert until the springs are fully compressed. Fill until the water level reaches just above the Insert. When you press down on the grid insert with the polisher, the springs will pump water upwards to the pad. Always operate the pad washer with the Splash Guard closed. For heavily soiled pads, spin the pad in the pad washer for 10 seconds to thoroughly wet it. Then spray on the Chemical Guys Pad Cleaner Pad Renewing Solution and let it penetrate for 1 minute. Then use the pad washer again to clean the pad. Always use the Dual Action Pad Washer with the polisher on its lowest setting for cleaning. You can use a slightly higher setting for drying. Move the polisher around inside the pad washer to be sure all parts of the pad are cleaned.