10% Off when you pre-order. Call now to place you order.
Product ID: 3150
Mytee HP60 Spyder Exractor
The Mytee HP60 Spyder Hot Water Carpet & Upholstery Extractor is proof that you don’t have to spend a small fortune to get a quality hot water carpet extractor. Not too big and not too small, the Mytee HP60 Spyder is perfect for enthusiasts and small detail shops that demand a capable and reliable hot water carpet extractor. From the 1200 watt heating element to the 5 gallon recovery and solution tank, the Mytee HP60 Spyder will surely fulfill all your carpet and upholstery cleaning needs. The Mytee HP60 Spyder Hot Water Carpet & Upholstery Extractor is often referred to as the “mini Grand Prix” because it shares several of the same components and features with Mytee’s flagship hot water carpet extractor, the HP-100 Grand Prix. Like the larger HP-100 Grand Prix, the Mytee HP60 Spyder utilizes a 1200 watt in-line heater with a maximum temperature of 210 degrees Fahrenheit.
The 1200 wattt in-line heater paired with the enormous 137 inches of water lift produced by the powerful single 3-stage motor enables the Mytee HP60 Spyder to deep clean carpet and upholstery, ridding it of ground-in dirt, grime and grease. The Mytee HP60 Spyder Hot Water Carpet & Upholstery Extractor was designed, engineered and manufactured to be used daily. The roto-molded polyethylene body is rugged and well built and the 3 inch stainless steel upholstery tool won’t rust over time. Features like this are what set the Mytee HP60 Spyder Hot Water Carpet & Upholstery Extractor apart from lesser units.
Features: 5 gallon solution tank (approx.) 1,200-watt in-line heater with maximum 210˚ Single 3-stage LA motor 130″ of water lift, 100 CFM High drain valve, perfect for emptying into a standard bucket Compact design to fit perfectly into a van, truck or storage area Durability roto-molded polyethylene material that resists rusting and denting
Includes: 15′ vacuum and internal solution hose 4″ stainless steel upholstery tool Heatguard hosewrap, made of neoprene wetsuit material Specs Body - Roto-molded polyethylene Solution Tank - 5 Gallons (approx) Vaccum Tank - 5 Gallons Vaccum Tank Auto Shut off - 4 Gallons Vaccum - Single 3 Stage LA CFM - 100 H20 - 130" Pump - Diaphragm PSI - 120 GPM - 1.3 Heater - 1200W, 210 degree Lokcing Casters - 3" Power Cord - 25" Amp Draw - Cord One:20 Weight - 69lbs
Please Note: All service, warranty, tech support is done directly through Mytee. eShine Car Care does not repair machines. Please contact Mytee direct at PLEASE CONTACT THE WARRANTY DEPARTMENT 858-679-1191 X104